60 total results found
General information on LSIO (linuxserver.io) images in Kubernetes
Random tidbits about Docker
General notes about managing baremetal and hardware devices
Miscellaneous 3rd party service provider notes
Useful Applets and Commands
Notes about the Dell Storage Array md1200/md1220/md3200
Docker in Docker in Kubernetes
Kubernetes, Containerd, and You
The fun I've encountered with using Kubernetes with ContainerD
Anson Learns Python
Anson Learns Docker
I'm learnding about whales
Pybadge Dev Notes
End goal: DIY Tamagotchi
Learn 2 Python Notes
Anson learns Python from a Udemy course. Here are some notes.
<p id="bkmrk-the-documentation-no">The documentation notes port 6875, this is just a random external port. NGINX is serving on port 80.</p> <p id="bkmrk-laravel-requires-%2212">Laravel requires "127.0.0.1" as DB address if hosted in same pod, not "Localhost" ...
<p id="bkmrk-docker-run---net%3Dhos">docker run --net=host --env DISPLAY="10.254.201.125:0" --volume="$HOME/.Xauthority:/root/.Xauthori ty:rw" xi xeyes</p> <pre id="bkmrk-from-centos%3A7-run-yu"><code class="language-Docker">FROM centos:7 RUN yum update -y ...
md1200 disk shelf
<p id="bkmrk-i-had-a-lot-of-probl">I had a lot of problems getting the fans to spin down. To start with I had to buy a <a href="https://www.ebay.com/itm/New-Fit-for-Dell-Password-Reset-Service-Cable-MN657-MD1200-MD3200-US-Shipping/184117891396">special cable</...
<p id="bkmrk-configuring-pfsense-">Configuring pfsense dyndns with namecheap is a big bag of bullshit</p> <p id="bkmrk-remember-to-use-the-">Remember to use the generated apikey as the password</p> <p id="bkmrk-host-%3D-%22%40%22-domain-%3D-">host = "@" doma...
<p id="bkmrk-sometimes-this-will-">Sometimes this will drop into a shell instead of booting actual hosts. </p> <p id="bkmrk-either-manually-type">Either manually type "exit" then Boot Maintenance Manager > Boot From File > EFI > Debian > grubx64.e...
swapoff stop kubelet from working
<p id="bkmrk-swap-gets-re-enabled">Swap gets re-enabled for whatever reason on the kubernetes master, it requires manually doing a `swapoff -a` on boot to get the kubelet started again.</p>
Client Config notes
<p id="bkmrk-ran-this-on-all-the-">Ran this on all the hosts in the cluster; <code>sysctl -q net.ipv4.conf.all.src_valid_mark=1</code></p> <p id="bkmrk-%C2%A0"> </p> <p id="bkmrk-needed-the-privilege">Needed the privileged & net_admin for tunnel binding<...
<p id="bkmrk-this-was-an-example-">This was an example of a call requested from the LSIO discord to add a tag on completion of a torrent. This is a working example of authenticating to the API and then calling it to add the "done" tag.</p> <pre id="bkmrk-curl...
Mount paths with dvrfs
<p id="bkmrk-today-i-spent-some-t">Today I spent some time with Stuart in linux-chat working out why Plex couldn't see files on Docker on Alpine on WSL2 on Windows over an SMB share on the network to another windows host.</p> <p id="bkmrk-we-were-able-to-get-...
Switching to Mysql from Sqlite
<p id="bkmrk-i-constantly-had-iss">I constantly had issues of sqlite DB locks just "occurring" even when no traffic to the app was happening. This happened on NFS, Root NFS, and iSCSI block stores alike.</p> <p id="bkmrk-in-an-attempt-to-mit">In an attempt to...
Docker-Compose with Mullvad Wireguard & arbitrary service
I was able to make this work really easily in native Kubernetes pods, but lots of folks had been asking questions about getting Wireguard connected to an arbitrary service properly and safely that may not have the means to use that infrastructure. Below are my...
Custom dockerfile install of NordVPN
<p id="bkmrk-a-user-reached-out-n">A user reached out noting that a connected service with <code>network_mode="container:vpn"</code> couldn't get into the webUI. I directed them to the <a href="https://bookstack.almueti.com/books/wireguard">https://bookstack.a...
<p id="bkmrk-this-is-to-chronicle">This is to chronicle the install and testing of the lsio build slave process in kubernetes</p> <pre id="bkmrk-from-debian%3Astretch-"><code class="language-">FROM debian:stretch RUN apt-get update RUN apt-get install -y ...
One user claimed that when they enabled wireguard via a `docker-compose up` that all containers lost internet access. TCPDumps showed that NAT from the bridges to the external interface had been lost at some point, indicating that the iptables may have bee...
Binding with Wireguard
version: "3.7" services: wireguard: image: linuxserver/wireguard container_name: wireguard cap_add: - NET_ADMIN - SYS_MODULE environment: - PUID=1000 - PGID=1000 - TZ=Europe/London volumes: ...
Wireguard Container + Server
SawToday at 9:18 AMEvening, maybe someone can help me. I am really not a network professional. I installed the Wireguard container on my rootserver, and on my server here in my own lan. The connection works too, but I can't get the route right, so the docker h...
This is the docker-compose full-up service from https://pterodactyl.io/ This requires some customization on your router to port forward 80 & 443 & 2022 to the host with this compose for full functionality, but that is beyond the scope of this testing....
The Kubernetes documentation states: ===== When using Docker, kubeadm will automatically detect the cgroup driver for the kubelet and set it in the /var/lib/kubelet/config.yaml file during runtime. If you are using a different CRI, you must pass your cgroup...
Captain's Log: Progress Report
Learning Python Log So I can see how I grow because the code doesn’t always show everything I’ve done Wed 11/11/20 My first day starting to learn Python. Just watched a few intro to Python lectures on YouTube. Thurs 11/12/20 https://learn.adafruit.com/ada...
Captain's Log Progress Report
Anson learns Python Here's a progress log on what Anson learns on his Python journey. Just to keep track and see progress. Current Goals These are taken from notes on 1/5/21 Finish the Udemy course on Python Create the game snake Turn my Excel sheet...